We offer barrel, rack and wired tin plating on steel, brass and copper. If tin plating is required on brass parts we need to put a barrier plate of nickel or copper on the parts to keep the brass from migrating through the tin, causing poisoning of the tin. You must specify if you do not want the nickel or copper barrier plate.

Tin is used as a base for soldering, to prevent galling or seizing, for corrosion resistance or to prevent the formation of a case during nitriding. We do tin plating as per MIL-T-10727B and ASTM-B 545, Type 1 or equivalent. Thickness can range from a flash of 0.0001" to 0.0006". Higher thicknesses are possible, if required. Please let us know if you require a Certificate of Compliance.

If you have any question regarding tin plating, feel free to
contact us.